65
Right Side Print Start Position
The print start position for the right side of the media is dependent on the Media Size Check setting from
the Printer Setup menu.
• When the Media Size Check setting is turned on, the print start position is approximately 0.4 inch
(10 mm) from the right edge of the media when using the media edge plates, and 0.2 inch (5 mm)
when not using the media edge plates.
1 0.2 inch (5 mm)
2 0.2 inch (5 mm)
Note: You can adjust the print start position by changing the Print Start Position or Side Margin
(Right) settings in the Printer Setup menu.
To Next Page
Loading...
