70
Setting Options Description
Media Adjust Auto Performs media feed and head
alignment adjustments. Use this setting
only after trying the following first to
correct printout issues:
• Select Auto for the Media Adjust
setting during Easy Media Setup
• Adjust the Advanced Settings
Note: Auto is not displayed when
Film, Canvas, Textile, or
Paper/Others is selected as the Media
Type setting.
Manual
Advanced Settings — See the next table.
Restore Settings Yes Returns all settings for the selected
custom paper to their default values.
No
Advanced Settings options
Setting Option Description
Platen Gap 1.6 Adjusts the gap between the media and
the print head. Select 1.6 (default) for
most media. Select 2.0 if your printouts
are scratched or smudged. Select 2.5 if
printouts are still scratched or smudged
after selecting 2.0.
Note: Choosing a larger gap than
necessary can cause ink stains inside
the printer, reduce print quality, or
shorten product life.
2.0
2.5
To Next Page
Loading...
