72
Setting Option Description
Multi Strike Printing Off Select the number of times each line is
printed. You may need to increase this
setting when performing high-density
printing using backlight films.
1 to 8
Feed Speed Limiter On Select Off for most situations to
maintain print speeds. Select On if you
are using thin media and it sticks,
wrinkles, or tears easily during printing.
Off
Pressure Roller Load Low Select High for most situations. Select
Medium or Low if you notice wrinkling
around the pressure rollers, stains from
the print head striking the media, or
stains from the roller sticking to the
media.
Medium
High
Remove Skew On Lets you enable paper skew reduction.
Select On for most situations. Select
Off if your media shows traces from the
rollers due to skew correction.
Off
Periodic CL Cycle Auto Select Auto to have the printer
automatically perform head cleaning
based on your selected media settings.
Select Manual if you want to perform
head cleaning based on a set length or
number of pages printed.
Manual
Adjusting Media Feed and Head Alignment
Parent topic: Using the Control Panel Menus
Related tasks
Loading Media
Saving Sets of Media Settings
To Next Page
Loading...
