90
Caution:
• If ink remains on these parts, it could transfer to your printouts. Continued use of your product with ink,
paper particles, or lint on these surfaces could damage the print heads or clog the nozzles.
• Do not use the ink cleaner to clean these parts.
1. Turn off the product, wait for the LCD screen to turn off, and unplug both power cables. If the
optional drying system is installed, unplug the power cable for it also.
2. Wait for one minute, then open the front cover.
3. Dampen a soft cloth with water and wring it out thoroughly.
4. Use the damp cloth to clean the platen heater and inside the platen grooves.
To Next Page
Loading...
