241
Setting Options Description
Auto Cleaning On Select the option to automatically perform a
print head check and cleaning when the
printer turns on and before printing
Select Standard to set a normal automatic
cleaning, or Custom to set the timing and
frequency of automatic cleaning from the
following options:
• Nozzle Check Schedule: Sets whether to
perform a nozzle check during printing or
only after printing has finished
• Nozzle Check Sensitivity: Adjusts the
number of clogged nozzles that trigger a
cleaning cycle
• Nozzle Check Result Notice: Sets
whether the printer reports if there are still
clogged nozzles after automatic cleaning
Off Disables the print head checking and
automatic cleaning
Printing Language* USB
Network
Select the printing language to use for each
connection mode
Auto: select for most printing situations
HP-GL/2: select if HP-GL/2 or HP RTL print
data sent from a CAD application does not
automatically switch the printing mode
PS: select if PS print data does not
automatically switch the printing mode
Universal Print Settings* Various options See the Universal Print Settings table below
HP-GL/2 Unique Settings Various options See the HP-GL/2 Unique Settings table
below
PS Menu Various options See the PS Settings table below
Reduce Edge Blurriness On
Off
Select On to reduce edge blurring in image
outlines, text, and ruled lines
To Next Page
Loading...
