242
Setting Options Description
Memory Device Interface Enable
Disable
Select whether to Enable or Disable use of a
memory device
Thick Paper On
Off
Select On to widen the platen gap to prevent
scuffing if you are printing on thick paper
Bidirectional On
Off
Select On if you want the print head to move
left and right during printing
Select Off to decrease misalignment of ruled
lines, but slow down printing
Print Nozzle Check Pattern
During Print
Every Page
Off
Sets whether to print a nozzle check pattern
before the printer prints each page
Use Production Stacker Enable
Disable
Select whether to Enable or Disable use of
the optional production stacker
PC Connection via USB Enable
Disable
Select whether to Enable or Disable access
to the printer from a USB-connected computer
USB I/F Timeout Setting 20 to 600 seconds Specifies the length of time before ending
communication from a USB-connected
computer; available only when the optional
SSD Unit is connected
*The Printing Language and Universal Print Settings menus can be locked by an administrator. If you
cannot access or change these settings, contact your administrator for assistance.
Paper Source Settings
To Next Page
Loading...
