244
Setting Options Description
Cut Settings
Auto Cut Automatically cuts the roll paper after printing
Print Cutting Guideline Select On to print cut lines on roll paper (if
Auto Cut is turned off)
Wait for Cut Between
Pages
Select On to pause before cutting pages after
printing
Cut for Borderless Print Select Two Cuts to insert a margin and cut
twice between pages; or One Cut to cut once
between pages
Quick Cut Select On to cut once between pages while
the next page is still printing
Cut Mode Select Quiet to reduce the speed and noise
when cutting paper
Margin Refresh Select On to automatically remove ink stains
from a previous borderless print by trimming
the leading edge of the paper
Roll End Option Selects the action when roll paper runs out
and you load more paper.
Continue: Prints the remaining data
Stop Printing: Does not print the remaining
data
Reprint: Restarts the print job from the
beginning; available if the optional print server
is connected
Take-up After Cut Stores the print on the Auto Take-up Reel (if
installed) after cutting it off the roll
Error Notice Paper Size Notice
Paper Type Notice
Detect Paper Skew
Select On to display an error message when
the output size or paper type settings differ
between the driver and printer, or if the paper
is skewed
To Next Page
Loading...
