245
Setting Options Description
Platen Gap Offset Standard
Wide
Wider
Widest
Adjusts the distance between the print head
and the paper
Cut Sheet/ Poster Board
Slot
Front
Back
Select a location for loading cut sheets or
poster board
Custom Paper Setting
You can select individual paper settings for each registered custom paper setting (01 to 30).
Note: You cannot change individual paper settings for custom paper settings registered through the
driver or other software.
Setting Options Description
Change Name — Use the on-screen keyboard to enter a name
for the custom paper setting (this name is
displayed in the Paper Type list)
Change Reference Paper Various options Select the media type for the paper closest to
the one you are using
Advanced Paper Settings options
Confirm ICC Profile Name — Displays the ICC profile name
Confirm Color Density — Displays the color density
Paper Thickness 0.01 to 1.50 mm or
0.4 to 59.1 mil
Select the thickness of the roll paper;
displayed when using a custom paper type
To Next Page
Loading...
