246
Setting Options Description
Platen Gap Auto
1.2
1.6
1.9
2.1
2.4
Select the distance between the print head
and the paper; displayed when using a
custom paper type
Top Margin 3 mm
15 mm
20 mm
45 mm
Select the margin for the leading edge of the
printed image
Depending on the paper type and printing
environment, colors may be uneven near the
leading edge if the margin is small.
Paper Suction –3 to +3 Select to adjust the printer's suction setting;
choose lower values for thinner papers
Paper Size Check On
Off
Select On to detect the paper width when
paper is loaded.
Select Off if a paper setting error occurs when
paper is correctly loaded.
Note: If this setting is set to Off, the printer
may print beyond the edges of the paper,
causing ink to get on the printer.
Auto Cut Follow Paper Source
Settings
Never Cut
Select Follow Paper Source Settings to
automatically cut roll paper after each page is
printed depending on the paper source
settings, or select Never Cut to cut paper
manually
Roll Core Diameter 2-inch
3-inch
Sets the paper core size for the loaded roll
paper
Paper Eject Roller Auto
Use
Do Not Use
Presses down on paper as it is ejected. Select
Use if the print head strikes the paper. If you
are printing on glossy paper, select Do Not
Use to avoid damaging the paper surface.
To Next Page
Loading...
