Epson TM-C3500 Series Developer's Guide

84
Roll Paper
Compatible paper formats are as follows.
• Continuous paper (black marks)
• Die-cut labels (black marks)
• Die-cut labels (gaps)
• Die-cut labels with transparent backing paper
Paper Handling Method
• Continuous paper (black marks)
Set the leading edge of the first black mark so that it is located at 172.5 to 200 mm from the
leading edge of the paper.
Do not set the black mark so that it is located at less than 172.5 mm from the leading edge of the
paper.
• Die-cut labels (black marks and gaps) and die-cut labels (gaps) with transparent backing paper
Set the leading edge of the first label so that it is located at 172.5 to 200 mm from the leading
edge of the paper.
Do not set the label or black mark so that it is located at less than 172.5 mm from the leading
edge of the paper. This area must only consist of backing paper.
Black mark width leading edge
172.5 to 200 mm
Paper feed direction
Black mark width leading edge
172.5 to 200 mm
Paper feed direction

Epson TM-C3500 Series Specifications

General

Print Technology	Inkjet
Print Resolution	Up to 720 x 360 dpi
Ink Type	Pigment-based ink
Interface	USB 2.0, Ethernet
Media Handling	Roll paper
Operating System Support	Windows, Mac OS
Dimensions	310 x 283 x 261 mm
Weight	Approx. 12 kg
Media Width	30 to 112 mm
Media Type	Synthetic
Cutter	Auto cutter
Ink Cartridges	Individual ink cartridges (cyan, magenta, yellow, black)
Print Speed	Up to 103 mm/sec