1-2 General Information Rev. A
❏ A counter function that allows checking the printer by remote maintenance
❏ Several interface models (USB, RS-232C, bidirectional parallel) are supported
1.1.4 About control method
❏ Command protocol based on the ECS/POS
®
Proprietary Command System.
❏ Automatic Status Back (ASB) function that automatically transmits changes in the printer
status
❏ Windows
®
printer driver is provided. (Advanced Printer Driver, and OPOS.)
1.2 Product Structure
1.2.1 Standard Parts Included with the Printer
This printer is packed with the materials listed below.
❏ User’s Manual
❏ Roll paper (diameter 40 mm {1.57"}) 1 roll
❏ I/F fixing screws (hexagonal millimeter screws)
❏ Power switch cover (using this cover enables you to prevent accidental turning off of the
power)
❏ Exclusive ribbon cassette ERC-32
❏ Endorsement ribbon cassette (only for printers equipped with the optional endorsement
print mechanism)
1.2.2 Options
The options for this printer are provided as below.
❏ EPSON power supply unit, PS-170, PS-180
❏ MICR reader (factory-installed option) (available only for serial interface model)
❏ Endorsement printer (factory-installed option) (available only for MICR model)
❏ Direct connection customer display DM-D105/D205 or DM-D106/DM-D206 (available only
for serial interface model or the USB model)
❏ Paper-width spacer for 58 mm or 60 mm {2.3 or 2.4"} PG-58
❏ Special tray for TM-H6000 / H6000II (PT-6000, DPR-6000, TA-6000)
To Next Page
Loading...
