Epson TM H6000 - B/W Direct Thermal User Manual

Rev. A v
TM-H6000II Technical Reference Guide
Safety Precautions
EMC and Safety Standards Applied
Product Name: TM-H6000II
Type Name: M147B or M147C
The following standards are applied only to the printers that are so labeled. (EMC is tested using the EPSON PS-170 or
PS-180 power supply.)
Europe: CE marking
Safety: EN 60950
North America: EMI: FCC/ICES-003 Class A
Safety: UL 1950/CSA C22.2 No. 950
Japan: EMC: VCCI Class A
JEIDA-52
Oceania: EMC: AS/NZS 3548
M147B: Class B
M147C: Class A
WARNING
The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards of this
device.
You are cautioned that changes or modifications not expressly approved by Seiko Epson could void your authority to
operate the equipment.
CE Marking
The printer conforms to the following Directives and Norms
Directive 89/336/EEC
EN 55022
M147B: Class B
M147C: Class A
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
Directive 90/384/EEC
EN45501
WARNING
M147C is a Class A product. In a domestic environment these products may cause radio interference in which case the
user may be required to take adequate measures.

Epson TM H6000 - B/W Direct Thermal Specifications

General

Brand	Epson
Model	TM H6000 - B/W Direct Thermal
Category	Printer
Language	English