1-6 General Information Rev. A
Note:
Kanji character spacing by default setting is 2 half dots. (Kanji character spacing can be changed by ESC/
POS command.) Printing speed for Kanji characters shown in table above is in the case of full column
printing with two-pass printing.
1.5.1.1 Paper Specifications
1. Cut sheet
Paper type:Normal paper, pressure-sensitive paper, carbon copy paper
Paper size:70 - 148 mm (W)
×
150 - 210 mm (L) (2.8 - 5.8”(W)
×
5.9 - 8.3”(L))
Copy capability and paper thickness:
• Normal paper (single-ply):0.09 to 0.2 mm (0.0035 to 0.0079 in.)
• Carbon copy paper
combination:4 sheets maximum (original + 2 copies)
• Example: one original + 2 copies,
Ambient temperature and copy capability:
Copy capability is greatly influenced by the ambient temperature, so printing must be
performed under the conditions described in the table below.
Backing paper: 0.07 to 0.12 mm (0.0028 to 0.0047 in.)
Copy and original: 0.04 to 0.07 mm (0.0016 to 0.0028 in.)
Carbon paper: Approximately 0.035 mm (0.0014 in.)
Total thickness: 0.09 to 0.31 mm (0.0035 to 0.0122 in.)
Original paper 0.04 mm
Carbon paper 0.07 mm (0.035 mm
×
2 sheets)
Copy paper 0.04 mm
Backing paper 0.07 mm
Total thickness 0.22 mm (0.0087 in.)
Relationship between ambient temperature and number of copies
Number of copies Ambient temperature
Original + 3 copies 10 to 40
°
C (50 to 104
°
F)
Original + 1 copy 5 to 45
°
C (41 to 113
°
F)
To Next Page
Loading...
