Epson TM H6000 - B/W Direct Thermal - 1.4 Product Specifications

1-4 General Information Rev. A
1.4 Product Specifications
Print method
Slip: 9-pin serial impact dot matrix
Wire pitch approximately 0.353 mm {1/72"}
E/P: 8-pin shuttle impact dot matrix
Wire pitch approximately 0.353 mm {1/72"}
Receipt: Thermal line
0.141 dots/mm × 0.141 dots/mm (180 dpi × 180 dpi)
Paper width
Slip & E/P: 68mm to 230mm × 68mm to 297mm
NOTE: The minimum size is 68mm × 152mm
Receipt: 80 mm / 60 mm / 58 mm {3.15"/2.36"/2.28"}
NOTE: default setting is 80 mm {3.15"}.
58 mm {2.28"} or 60 mm {2.36"} paper width can be selected using
the paper roll spacer.
Cut type (Receipt) Partial cut (cutting with one point on left edge left uncut)
Character sets
Slip: 95 alphanumeric, 37 international characters, graphics: 128 × 12 pages.
(including two space pages)
Multilingual character model supports printing with one of the
following character sets:
Simplified Chinese (GB2312): 7580
Traditional Chinese (Big 5): 13494
Receipt: 95 alphanumeric, 37 international characters, graphics: 128 × 11 pages.
(including a space page)
Multilingual character model supports printing with one of the
following character sets:
Simplified Chinese (GB2312): 7580
Traditional Chinese (Big 5): 13494
E/P: 95 alphanumeric, 37 international characters, graphics: 128 × 11 pages.
(including a space page)
Interface
(compatible)
RS-232C / Bidirectional parallel
Dealer options: RS-485, USB, 10Base-T I/F
Buffer
Receive buffer: 4KB/45 bytes
User-defined buffers (both for user-defined characters and user-defined bit images)
For Receipt: 12KB
For Slip: Approximately 3KB
Macro buffer: 2KB
Non-volatile graphics data buffer:
384KB
192KB (Multilingual character model)
User NV memory: 1KB
Power supply Power supplied by an AC adapter — the PS-170 or PS-180 (option)
Operating voltage +24 VDC ± 10% (optional power supply: EPSON PS-170, PS-180)
Current
consumption
(at 24V except for
drawer kickout
driving)
Slip: Operating: Mean:Approximately 1.7A
(Character font A α-N, all columns printing)
Peak: Approximately 5.5A
Receipt: Operating:Mean:Approximately 1.8A
(Character font A α -N, all columns printing)
Peak: Approximately 7.7A
Standby: Mean: Approximately 0.2A