1-26 General Information Rev. A
1.7.6 Installation
The printer must be installed horizontally.
Impact resistance: When packed:
Package: EPSON standard package
Height: 50 cm (19.69")
Directions: 1 corner, 3 edges, and 6 surfaces
No external or internal damage should be found after the
drop test, and the unit should operate normally.
When unpacked:
Height: 5 cm (1.97")
Directions: Lift one edge and release it (for all 4 edges).
When the printer is not printing, no external or internal
damage should be found after the drop test.
Acoustic noise (operating): Receipt:
When using autocutter:
Approximately 52 dB (bystander position)
When not using autocutter:
Approximately 45 dB (bystander position)
To Next Page
Loading...
