Epson TM H6000 - B/W Direct Thermal

Rev. A General Information 1-13
TM-H6000II Technical Reference Guide
❏ The printer can perform endorsement printing.
Area of personal check where MICR character recognition is impossible
❏ To print endorsements in the specified area (within 38.1 mm {1.5”} from the top), set the
print position for the last line so that it is printed at least 3 mm {0.118”} above the bottom of
the printable area (Especially when the printer is used near the display device, the user is
required to check the recognition rate of the MICR).
Inserting
direction
49.0 (1.93
”
)
Area where recognition is impossible.