3-26 Setup Rev. A
Outline of the installation and setup procedure is as follows.
START
1. Installation OPOS ADK
(Execute the Setup.exe in DISK1, and continue to installation by wizard)
Is installation completed?
2. Setup the OPOS & device setting by using SetupPOS utility
You can setup the OPOS and device setting by the SetupPOS utility.
2.1 Setup the OPOS & device setting
Completed
ERROR
For detail refer to
[ User Manual]
❏ Select the device and I/F setting
❏ Device specified setting
• Paper type & size setting
•Bitmap setting
• Color print setting
To Next Page
Loading...
