Epson TM H6000 - B/W Direct Thermal User Manual

Rev. A Maintenance & Troubleshooting 4-5
TM-H6000II Technical Reference Guide
❏ Errors that have the possibility of recovery:
When a recoverable error occurs, after the cause of the error is removed, the printer can
recover from the error by transmitting error recovery command without turning off the
power:
See “Removing a Paper Jam” (page 4-3) for removing a paper jam.
Note:
When the printer recovers from an error using error recovery command while slip paper is selected, the
printer first ejects the slip. A error recovery command do loading paper additionally. However, when the
printer recovers from a slip ejection error, the printer only ejects the slip and does not load paper.
ERROR Description
ERROR LED Blinking Pattern
Recovery
Autocutter error The autocutter does not
work correctly
Recovers by error recovery
command
Home position
detection error
The home position cannot
be detected due to a
paper jam
Recovers by error recovery
command
Carriage detection
error
The carriage is
malfunctioning due to a
paper jam, etc.
Recovers by error recovery
command
Paper roll cover open
error
Printing on the paper roll is
not performed correctly
due to a paper roll cover
open or unit cover open
Recovers by error recovery
command with the cover
closed
Slip ejection error The slip is not ejected
when the printer feeds a
specified amount of paper
Recovers by error recovery
command
Unit cover open error Printing on the paper roll or
on the slip is not performed
correctly due to a unit
cover open
When bit 8 of memory switch
8 is set to OFF: Recovers by
closing the unit cover
When bit 8 of memory switch
8 is set to ON: Recovers by
error recovery command
320 ms

Epson TM H6000 - B/W Direct Thermal Specifications

General

Brand	Epson
Model	TM H6000 - B/W Direct Thermal
Category	Printer
Language	English