Chapter 1 Product Overview
19
1
Power Functions
You can customize the printer using the power functions, the auto-power off function and
battery charge mode function to save the battery power or minimize the battery deterioration.
Auto-Power Off
The printer turns off the power automatically after the specified amount of time elapses in the
power saving status.
The auto-power off function is initially disabled. (The auto-power off time is set to 0.)
Battery Charge Modes
The printer acts differently when connected to the optional AC adapter depending on the battery
charge mode.
The printer has two modes and is initially set to the mode 1.
Mode 1
In the mode 1, the printer charges the battery even if the battery is fully charged.
Mode 2
In the mode 2, the printer charges the battery when the remaining battery charge is less than
fully charged.
The auto-power off time is selectable with the customized value. To set the customized
value, see "Software Settings" on page 44.
The printer enters the power saving mode when it has nothing to process. The printer
recovers from the power saving status when the roll paper cover is opened, the Feed
button is pressed, or data is received.
The battery charge mode is selectable with the customized value. To set the customized
value, see "Software Settings" on page 44.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
