84
Paper Specifications
Specified original paper type
58 mm {2.28"} width paper printing 60 mm {2.36"} width paper printing
Type Thermal paper
Form Roll paper
Size Width 57.5 ± 0.5 mm {2.26 ± 0.02"} 59.5 ± 0.5 mm {2.34 ± 0.02"}
Outside diameter 51.0 mm {2.01"} maximum
Roll width when
taken up
57.5 ± 0.5 mm {2.26 ± 0.02"} 59.5 ± 0.5 mm {2.34 ± 0.02"}
Roll paper core Outside diameter (receipt): 18.0 mm {0.71"} or more
Outside diameter (continuous label): 31.4 mm {1.24"} or more
Width: Same as the paper width or less than the paper width by 1 mm
{0.04"}
Paper type no. Manufacturer
P30023, P31023, P35023 Kanzaki Specialty Papers
For the winding direction of a thermal roll, the chromogenic side must face outside.
Paper must not be pasted to the roll paper spool.
For the best print quality for each paper type, it is recommended to set the print density.
The print density can be set with the customized value. To set customized value, See
"Software Settings" on page 44.
To Next Page
Loading...
