52
ESC/POS Commands
ESC/POS is the Epson original printer command system. With ESC/POS commands, you can
directly control all the TM printer functions, but detailed knowledge of printer specifications or
combination of commands is required.
To use ESC/POS commands, you need to agree to a nondisclosure contract first and obtain the
ESC/POS Application Programming Guide. Ask your dealer for details.
The ESC/POS command functions are listed below. See the ESC/POS Application Programming
Guide for more details.
ESC/POS command functions
With the Bluetooth models, after opening the COM port, leave an interval of 300 msec or
more before sending data to the COM port.
Example: For Windows, after obtaining a valid handle of CreateFile, leave an interval of 300
msec or more before executing WriteFile.
Print Position Commands
Horizontal tab
Set absolute print position
Set horizontal tab positions
Select print direction in page mode
Set print area in page mode
Set relative print position
Select justification
Set absolute vertical print position in page mode
Set left margin
Set print area width
Set relative vertical print position in page mode
Print Commands
Print and line feed
Print and return to standard mode (in page mode)
Print data in page mode
Print and feed n lines
To Next Page
Loading...
