44
Software Settings
With the customized values and memory switches, which are software settings for this printer,
you can set the various functions. For an outline of those functions, see the following section.
Use TM-P60II Utility, Software setting mode, or ESC/POS commands, to set the customized
values and memory switches.
TM-P60II
Utility
Software
setting mode
ESC/POS
commands
Customized values
User NV memory capacity ✔
NV graphics memory capacity ✔✔
Roll paper width ✔✔✔
Print density ✔✔✔
Print speed ✔✔✔
Interface mode ✔✔✔
Command execution during offline ✔✔✔
Autocutting at roll paper cover close ✔✔✔
Automatic paper reduction ✔✔✔
Automatic power off time ✔✔✔
Battery charge mode ✔✔
Offline response ✔
Operation mode when battery is low ✔✔
Battery status levels ✔
Memory
switches
Transmission of status notice ✔✔✔
Buzzer Settings ✔✔✔
Error signal output ✔
USB Class ✔✔✔
Bluetooth interface ✔✔
For detailed information about TM-P60II Utility, see the TM-P60II Utility User’s Manual.
For information about how to use the Software setting mode, see "Software Setting
Mode" on page 68.
For detailed information about ESC/POS commands, see the ESC/POS Application
Programming Guide.
To Next Page
Loading...
