Epson TM-P60II Technical Reference Guide

4
Warnings
WARNING
 To avoid risk of electric shock, do not set up this product or handle cables during a
thunderstorm.
 Never insert or disconnect the power plug with wet hands.
Doing so may result in severe electric shock.
 Handle the power cable with care.
Improper handling may lead to fire or electric shock.
 Do not modify or attempt to repair the cable.
 Do not place any heavy object on top of the cable.
 Avoid excessive bending, twisting, and pulling.
 Do not place the cable near heating equipment.
 Check that the plug is clean before plugging it in.
 Be sure to push the plug all the way in.
 Be sure to use the specified power source.
Connection to an improper power source may cause fire or electric shock.
 Do not place multiple loads on the power outlet.
Overloading the outlet may lead to fire.
 Shut down your equipment immediately if it produces smoke, a strange odor, or
unusual noise.
Continued use may lead to fire. Immediately turn the power off, disconnect the battery
pack, and then contact your dealer or a Seiko Epson service center for advice.
 Never attempt to repair this product yourself.
Improper repair work can be dangerous.
 Never disassemble or modify this product.
Tampering with this product may result in injury or fire.
 Do not allow foreign matter to fall into the equipment.
Penetration by foreign objects may lead to fire.
 If water or other liquid spills into this equipment, do not continue to use it.
Continued use may lead to fire. Immediately turn the power off, disconnect the battery
pack, and then contact your dealer or a Seiko Epson service center for advice.
 Do not use aerosol sprayers containing flammable gas inside or around this
product.
Doing so may cause fire.
 If any liquid from the battery gets into your eyes, promptly wash it out with clean
water for more than 10 minutes and consult your doctor immediately.
Otherwise, the liquid may cause loss of eye sight.
 Never disassemble or modify the battery pack.
This may cause fire, explosion, leakage, overheating or damage.
 Do not expose the battery to fire or heat it.
This may cause fire, explosion, leakage, overheating or damage.
 Should any battery liquid get on skin or clothing, promptly wash it off with clean
water.
Otherwise, the liquid may damage your skin.
 Do not expose the battery to water. Do not allow water to contact the terminals.
This may cause fire, overheating, or electric shock.

Epson TM-P60II Specifications

General

Color	-
Print technology	Thermal line
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Product color	Black
Wi-Fi	Yes
Ethernet LAN	No
Optional connectivity	USB 2.0, Wireless LAN
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Country of origin	China
Media thickness	0.05 - 0.08 mm
Supported paper width	60 mm
Mean time between failures (MTBF)	120000 h
Mean cycles between failures (MCBF)	16000000
Operating relative humidity (H-H)	10 - 90 %
Cables included	USB
Pallet width	800 mm
Pallet height	966 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	288 pc(s)
Quantity per pallet (UK)	432 pc(s)
Quantity per pallet layer	36 pc(s)
Quantity per pallet layer (UK)	54 pc(s)
Package depth	230 mm
Package width	185 mm
Package weight	1040 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	159 mm
Width	103 mm
Height	65 mm
Weight	610 g