Chapter 3 Application Development Information
63
3
Configuration menu
You can configure the settings as shown in the table below.
Menu Settings
Wireless
Wireless Settings (Communication Standard, Network Mode,
SSID, Channel, Encryption Type)
WPA Pre-Shared Key, Default WEP Key, WEP Key 1/2/3/4,
Authentication Algorithm
Power Save
Security
SSL/TLS
Server Certificate, Encryption Strength, Automatic Redirect
HTTP to HTTPS
Authentication
Certificate List
Self-Signed Certificate (Status, Subject)
CA-Signed Certificate 13 (Status, Subject)
CA Certificate 110 (Status, Subject)
Certificate Import
Certificate Import (File Type, File Name, Password)
TCP/IP
IPv4 Address
IP Address Settings (Acquiring the IP Address, IP Address,
Subnet Mask, Default Gateway)
Set Using Automatic Private IP Addressing (APIPA)
DNS/DDNS
DNS Server Addresses (IPv4) Settings (Acquire DNS Server
Address Automatically, DNS Server Addresses)
Host Name and Domain Name Setting (Acquire Host Name
and Domain Name Automatically, Host Name, Domain Name,
Register the Network Interface’s Address to DNS Server)
SNMP
Community (Read Only)
IP Trap (Trap1/2, Address, Community)
Bonjour
Bonjour (Disable/Enable)
Bonjour Name, Bonjour Printer Name, Location
Time Setting
Use Time Server
Time Server Address, Update Interval
Timeout Print (LPR, RAW (Port9100))
ePOS-Print Version, ePOS-Print (Disable/Enable), Device ID
You can also select the following functions from the optional configuration menu.
Administrator Information: Use to register administrator name and the printer location.
Reset: Use to reset the interface card or restore the default settings.
Password: Use to change the password.