22
Error Status
When an error occurs, the printer stops operating, goes offline, and the Error LED flashes.
There are three possible error types: automatically recoverable errors, recoverable errors, and
unrecoverable errors.
Automatically Recoverable Errors
Printing is no longer possible when automatically recoverable errors occur. They can recover
easily, as described below.
Recoverable Errors
Printing is no longer possible when recoverable errors occur. They can be recovered easily by
turning the power off and then on again or sending an error recovery command after eliminating
the cause of the error.
Error Error description
Error LED flash code
Recovery measure
Temperature
error
The temperature of
the print head, motor
driver IC, or battery is
high.
Recovers
automatically when
the temperature goes
down.
Error Error description
Error LED flash code
Recovery measure
Autocutter
error
Autocutter does not
work correctly.
Send the error recovery
command, or turn the
power off and on to
recover.
The error recovery command is valid only if a recoverable error (excluding automatically
recoverable errors) occurs.
To Next Page
Loading...
