Chapter 5 Replacement of the TM-P60
75
5
Replacement of the TM-P60
The TM-P60II is designed so that it can smoothly replace the TM-P60. This chapter describes
useful information for the replacement.
Compatibility
TM-P60 TM-P60II
Paper width Changeable (58 mm/60 mm)
Density 203 × 203 dpi
Number of dots 58 mm paper width printing: 420 dots
60 mm paper width printing: 432 dots
Print width 58 mm paper width printing: 52.5 mm
60 mm paper width printing: 54 mm
Autocutter Type Partial cut
Top margin Approx. 6.4 mm
Manual-cutter
position
Approx. 10.9 mm
Paper type Receipt (without black mark)
Continuous label paper
Character
structure
Font A 58 mm paper width printing: 12 × 24, 35 cpl
60 mm paper width printing: 12 × 24, 36 cpl
Font B 58 mm paper width printing: 10 × 24, 42cpl
60 mm paper width printing: 10 × 24, 43 cpl
Font C 58 mm paper width printing: 8 × 16, 52cpl
60 mm paper width printing: 8 × 16, 54 cpl
Internal buffer for NV area 384 KB
External Dimensions 65 × 103 × 159 mm
Case color EDG (Epson Dark Grey) EBCK (Epson Black)
Belt clip Attached
Shoulder strap Optional Not available