Epson TM-P60II - Appendix; Product Specifications; Printing Specifications

Appendix
81
Appendix
Product Specifications
Printing Specifications
dpi: dots per inch
*1: The printing speed listed above are the values when using a new battery fully charged, the print density is
100%, and at normal temperature. The printing speed changes automatically depending on the battery
remaining amount and the head temperature.
*2: Only for Traditional Chinese Model.
*3: Initial setting. Programmable by commands.
58 mm {2.28"} width paper printing 60 mm {2.36"} width paper printing
Printing method Thermal line printing
Dot density 203 × 203 dpi
Printing direction Unidirectional with friction feed
Maximum print speed*
1
Receipt paper: 100 mm/s {3.94"/s}
Continuous label Paper: 80 mm/s {3.15"/s} (Recommended)
Printing width 52.5 mm {2.07"}, 420 dots 54.0 mm {2.13"}, 432 dots
Characters per line Font A: 35
Font B: 42
Font C: 52
Kanji font*
2
: 17
Font A: 36
Font B: 43
Font C: 54
Kanji font*
2
: 18
Character spacing Font A/B/C: 0.28 mm {0.01"} (2 dots)
Kanji font A*
2
: 0.28 mm {0.01"} (2 dots)
Paper feed speed Approx. 100 mm/s {3.94"/s} (when feeding with the Feed button)
Line spacing*
3
Approx. 3.75 mm {0.15"}