Chapter 2 Setup
33
2
Installing or Replacing the Roll Paper
Follow the steps below to install or replace the roll paper.
If you hang the printer vertically on a belt using a belt clip on the back of the printer, see "When
Installing the Printer Vertically" on page 34.
When Installing the Printer Horizontally
1
Press the open button to open the roll paper cover.
2
Remove the used roll paper core, if there is one.
3
Insert the new roll paper in the correct direction.
Use paper that meets the printer specifications. For details about paper specifications, see
"Paper Specifications" on page 84.
To Next Page
Loading...
