Epson TM-S1000 Technical Reference Guide

Chapter 1 Product Overview
23
1
Sensors
There are 7 paper sensors, 2 cover open sensors, and 5 other sensors. Some scanners are not
equipped with some of them depending on the model.
Paper Sensors
ASF/SF sensor (A)
This sensor is located in the feeder paper path. It detects when a document is in the ASF/SF.
When the sensor detects a document, the DOCUMENT LED lights if scanning is possible.
Paper length sensor (B)
This sensor is located in the feeder paper path. It is mainly used for internal processing, but also
includes a function for detecting a piece of paper remaining in the feeder path in the event of a
paper jam or the like.
Middle sensor (C)
This sensor is located in the feeder paper path. It is mainly used for internal processing, but also
includes a function for detecting a piece of paper remaining in the feeder path in the event of a
paper jam or the like.
Franking sensor (D)
This sensor is located in the feeder paper path. It detects when a document has reached the
franking printing section.
A
H
B
C
D
E
K
L
M
N
I
F
G
J
Paper feed direction
Note: The illustration shows the multi feed model.

Epson TM-S1000 Specifications

General

Film scanning	No
Grayscale levels	256
Input color depth	- bit
Maximum scan size	120 x 235 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Scan media weight	60 - 120 g/m²
Dimensions (WxDxH)	160 x 355 x 176 mm
Standard media sizes	Length: 120 mm - 235 mm (approx 4.8 in - 9 in), Height: 68mm - 120 mm (approx 2.7 in - 4.8 in), Thickness: 0.075 x 0.2 mm (approx 0.003 in - 0.008 in), Weight: 60 - 120 g/m2 (approx 16lb - 32lb)

Weight and Dimensions

Depth	355 mm
Width	160 mm
Height	176 mm
Weight	4000 g