Epson TM-S1000 Technical Reference Guide

Chapter 1 Product Overview
27
1
Error Status
There are two possible error types: recoverable errors and unrecoverable errors.
Recoverable Errors
Processing is no longer possible when recoverable errors occur. They can be recovered easily by
turning the power off and then on again or sending an error recovery command from the driver
after eliminating the cause of the error.
Error Error description
Error LED flash code
Recovery measure
Mechanism
position error
When any of the
following errors occurs
during the initialization
and operation.
• Error detected during
hopper position
detection operation.
• Error detected during
franker position
detection operation.
• Error detected during
pocket switch board
position detection
operation.
Remove the cause
(foreign matter or
papers) and call
BiCancelError of the
TM-S1000 API or turn
off/on the power.
Approx.320 ms
Approx.5120ms

Epson TM-S1000 Specifications

General

Film scanning	No
Grayscale levels	256
Input color depth	- bit
Maximum scan size	120 x 235 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Scan media weight	60 - 120 g/m²
Dimensions (WxDxH)	160 x 355 x 176 mm
Standard media sizes	Length: 120 mm - 235 mm (approx 4.8 in - 9 in), Height: 68mm - 120 mm (approx 2.7 in - 4.8 in), Thickness: 0.075 x 0.2 mm (approx 0.003 in - 0.008 in), Weight: 60 - 120 g/m2 (approx 16lb - 32lb)

Weight and Dimensions

Depth	355 mm
Width	160 mm
Height	176 mm
Weight	4000 g