Epson TM-S1000 Technical Reference Guide

48
Franking Cartridge
Important Notes on the Franking Cartridge
•Keep the franking cartridges out of the reach of children.
•Do not disassemble franking cartridges.
•Be careful during handling because the ink can permanently stain clothing.
•Seiko Epson recommends using genuine Epson cartridges for your scanner. Products of ot
her
manufacturers may adversely affect t he scanner and printing quality, an d may result in the
scanner not being able to achieve the specified performance levels.
•Do not remove the franking cartridge from the packing box until immediately before its
installation. Leaving the cartridge out
of its packing for a prolonged period of time may
adversely affect printing quality.
•Use up the franking cartridge within 18 months from the date of production indicated on the
cartridge box.
•Dispose of the franking cartridge in accordance with any relevant national or local laws,
ordin
ances, and regulations.
Installing and Replacing the Franking Cartridge
Follow these steps to install a franking cartridge for the first time or to replace it.
1
Open the franker cover.
(See "Opening the Franker Cover" on page 47.)
2
If a used franking cartridge is installed, hold the knob at the top of the
cartridge and lift the cartridge out of the scanner.
Franking cartridge

Epson TM-S1000 Specifications

General

Film scanning	No
Grayscale levels	256
Input color depth	- bit
Maximum scan size	120 x 235 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Scan media weight	60 - 120 g/m²
Dimensions (WxDxH)	160 x 355 x 176 mm
Standard media sizes	Length: 120 mm - 235 mm (approx 4.8 in - 9 in), Height: 68mm - 120 mm (approx 2.7 in - 4.8 in), Thickness: 0.075 x 0.2 mm (approx 0.003 in - 0.008 in), Weight: 60 - 120 g/m2 (approx 16lb - 32lb)

Weight and Dimensions

Depth	355 mm
Width	160 mm
Height	176 mm
Weight	4000 g