Epson TM-S1000 Technical Reference Guide

Chapter 1 Product Overview
31
1
dpm: documents per minute, dpi: dots per inch (25.4 mm)
Pocket storage Main pocket 100 sheets or fewer (when the paper thickness is 0.13 mm or
less). However, the total thickness must be 13 mm or less
including warps.
Sub pocket
(Except for the
one pocket
model)
50 sheets or fewer (when the paper thickness is 0.13 mm or
less). However, the total thickness must be 6.5 mm or less
including warps.
Franking
cartridge
Type Exclusive franking cartridge (EFC-01)
Ink color Red
Life of ink 18,000 times (based on Epson’s standard pattern used for
printing)
Supply voltage DC24 V ± 10%
Interface USB 2.0
Reliability Life 1,000,000 sheets
MTBF 180,000 hours (A failure is defined as a random failure occurring
during the random failure period)
MCBF 2,470,000 cycles (An overall average failure interval based on
failures relating to wear out and random failures up to the
lifespan of 1,000,000 transactions.) and random failures up to
the lifespan of 1,000,000 transactions.)
Overall dimension (W × H × D) 355 × 176 × 160 mm {14.0 × 6.93 × 6.30 in}
Mass (approx.) Multi feed models: Approximately 4.0 kg {8.82 lb}
Single feed models: Approximately 3.9 kg {8.60 lb}

Epson TM-S1000 Specifications

General

Film scanning	No
Grayscale levels	256
Input color depth	- bit
Maximum scan size	120 x 235 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Scan media weight	60 - 120 g/m²
Dimensions (WxDxH)	160 x 355 x 176 mm
Standard media sizes	Length: 120 mm - 235 mm (approx 4.8 in - 9 in), Height: 68mm - 120 mm (approx 2.7 in - 4.8 in), Thickness: 0.075 x 0.2 mm (approx 0.003 in - 0.008 in), Weight: 60 - 120 g/m2 (approx 16lb - 32lb)

Weight and Dimensions

Depth	355 mm
Width	160 mm
Height	176 mm
Weight	4000 g