Chapter 1 Product Overview
15
1
Document LED (Green)
•Lights when the product is ready to process cut sheet paper in the ASF or while the product is
processing cut sheet paper.
•Flashes when the product is waiting for cut sheet paper insertion.
•Goes out except for the cases above.
ID Card LED (Green)
•Lights when ID card is set and the product is ready to process it.
•Flashes when the product is waiting for ID card insertion or removal.
•Goes out except for the cases above.
Ink LED (Orange)
•Lights when no ink cartridge is installed or it is time to replace the ink cartridge.
•Flashes when ink is low.
•Goes out when the ink cartridge is installed and remaining ink is enough.
Cleaning button
Pressing this button for 3 seconds or more starts the ink-jet head cleaning. (See "Cleaning the Ink-
Jet Head" on page 82
.)
Paper LED (Orange)
•Lights when the roll paper is out or almost out.
•Flashes when the product is waiting for test printing on the roll paper.
•Goes out when the remaining roll paper is enough.
Feed button
Pressing this button feeds the roll paper.
To Next Page
Loading...
