Epson TM-T82X Technical Reference Guide

15
Chapter 1 Product Overview
Recoverable Errors
The printer cannot print when a recoverable error occurs. It can be recovered easily by turning the power on
again or sending an error recovery command from the driver after eliminating the cause of the error.
Unrecoverable Errors
The printer cannot print when an unrecoverable error occurs. If the error persists after turning the printer off
and then on again, the printer may be defective. Contact qualified service personnel.
Error Error description Error LED status Condition for Recovery
Autocutter
error
Autocutter does not work
correctly
ON Recovers from the error when
the jammed paper or foreign
matter is removed, and the roll
paper cover is closed.
The error recovery command is valid only if a recoverable error (excluding automatically
recoverable errors) occurs.
Use the TM-T82X Utility to change the condition for recovery. For details, see the TM-T82X Utility
User's Manual.
CAUTION
Turn off the power immediately when an unrecoverable error occurs.
Error Error description Error LED flash code
R/W error in memory After R/W checking, the printer does not work
correctly.
High voltage error The power supply voltage is extremely high.
Low voltage error The power supply voltage is extremely low.
CPU execution error The CPU is executing an incorrect address.
Internal circuit
connection error
Internal circuits are not connected correctly.
LED OFF
LED ON
Approx. 320 ms

Epson TM-T82X Specifications

General

Print Method	Thermal line printing
Paper Width	80 mm
Autocutter	Yes
Power Supply	AC 100-240V, 50/60 Hz
Paper Roll Diameter	83 mm
Interface	USB, Ethernet
Dimensions	140 x 199 x 146 mm
Resolution	203 dpi x 203 dpi