Epson TM-T82X Technical Reference Guide

64
Appendix
Paper Specifications
80 mm model 58 mm model
Paper types Specified thermal paper
Form Roll paper
Size Roll paper diameter Max.: 83 mm {3.27"}
Roll paper spool outer diameter Min.: 18 mm {0.71"}
Roll width when taken up 80+0.5/-1.0 mm {3.15+0.02/-0.04"} 58+0.5/-1.0 mm {2.28+0.02/-0.04"}
Paper width 79.5±0.5 mm {3.13 ±0.02"} 57.5±0.5 mm {2.26±0.02"}
Paper thickness Maximum of 80 μm, minimum of 48 μm
Specified original paper type TF50KS-EY (Nippon Paper Industries Co., Ltd.)
PD160R (Oji Imaging Media Co., Ltd.)
KT48FA (Koehler Paper Group)
Epson Certified Media List for Thermal Receipt Printers
U https://www.epson-biz.com/?content=sht_tm_media
• Paper must not be pasted to the roll paper spool.
• For the best print quality for each paper type, it is recommended to set the print density.
(See
"Software Settings" on page 26.)
• Use of thermal paper with a pre-printed recording surface should be avoided. Using it can cause
the thermal head to stick to the thermal paper surface during printing, and cause printing
failure and other problems. The pre-printing also can result in reduced print density. Using
thermal paper with a pre-printed recording surface, pre-printing should be done in accordance
with the conditions (ink type, printing and other conditions) recommended by the paper
manufacturer, and the thermal paper should be checked to ensure that there is no faulty
printing, loss of print density, or other problems.

Epson TM-T82X Specifications

General

Print Method	Thermal line printing
Paper Width	80 mm
Autocutter	Yes
Power Supply	AC 100-240V, 50/60 Hz
Paper Roll Diameter	83 mm
Interface	USB, Ethernet
Dimensions	140 x 199 x 146 mm
Resolution	203 dpi x 203 dpi