Epson TM-T82X Technical Reference Guide

43
Chapter 3 Advanced Usage
Resetting the Interface Settings
Follow the steps below to reset the interface settings.
1
Turn off the printer and close the roll paper cover.
2
Hold down the status sheet button while turning on the printer.
A message is printed indicating that resetting is being performed, and the printer restarts.
• You can return the interface settings to their defaults from the Interface Setup mode. For details
on the Interface Setup mode, see "Interface Setup Mode (Ethernet model only)" on page 40
.
• Only network settings are returned to their defaults.
Hold down the status sheet button until the initialization execution message is printed.

Epson TM-T82X Specifications

General

Print Method	Thermal line printing
Paper Width	80 mm
Autocutter	Yes
Power Supply	AC 100-240V, 50/60 Hz
Paper Roll Diameter	83 mm
Interface	USB, Ethernet
Dimensions	140 x 199 x 146 mm
Resolution	203 dpi x 203 dpi