Epson TM-T82X Technical Reference Guide

20
Chapter 2 Setup
Installing the Printer
Observe the following precautions when installing the printer.
• The printer must be installed horizontally.
• Do not place the printer in a dusty location.
• Do not knock or strike the printer. This may cause defective print.
• Do not catch cables or place foreign matter under the printer.
• Take measures to prevent the printer from moving by vibration during paper cutting and when using a
drawer. Affixing tape (Model: DF-10) is provided as an option.
Connecting the Printer to the Host
USB Interface
When using USB cable to connect with host device, connect the USB cable to the printer, and after starting the
host device, turn the printer on.
When connecting the USB cable to the printer, fix the cable with the wire saddle to prevent it from being
disconnected.
• Be sure to install the driver before connecting the printer to the host computer.
• The printer uses a modular connector specifically designed for the cash drawer. Do not connect
the connector to an ordinary telephone line.
Do not place any weight or stress on the cable when using. Doing so could damage the cable and
connectors.
Wire saddle
USB cable

Epson TM-T82X Specifications

General

Print Method	Thermal line printing
Paper Width	80 mm
Autocutter	Yes
Power Supply	AC 100-240V, 50/60 Hz
Paper Roll Diameter	83 mm
Interface	USB, Ethernet
Dimensions	140 x 199 x 146 mm
Resolution	203 dpi x 203 dpi