18
Chapter 1 Product Overview
User-defined Page
You can store character data in the user-defined page (character code table: page 255) so that you can also print
characters not resident in the printer.
Maintenance Counter
With this function, printer information, such as the number of lines printed, the number of autocuts, and
printer operation time after the printer starts working, is automatically stored in NV memory. You can use the
counter information for periodical checks or part replacement.
• You can also check the print head running length and number of times of auto-cutting with the
self-test (see
"Self-test Mode" on page 36).
• The maintenance counter value is normally saved in the NV memory every 2 minutes (maximum
of 4 minutes). However, it is not automatically saved when the product is in the power-saving
mode or when the power is turned off without using the power switch.
To Next Page
Loading...
Need help?
General
