Epson TM-T82X Technical Reference Guide

30
Chapter 3 Advanced Usage
Line feed reduction rate
• Disabled (default setting)
• 25%
• 50%
• 75%
Barcode height reduction rate
• Disabled (default setting)
• 25%
• 50%
• 75%
Amount of reduction in character height
• Disabled (default setting)
• Extra character space reduction by 25%
• Extra character space reduction by 50%
• Extra character space reduction by 75%
Character code table defaults
Selectable from 43 pages including user-defined page
Default setting: PC437: USA, Standard Europe
International character defaults
Selectable from 18 sets
Default setting: USA*
*: The default setting for the Simplified Chinese characters model is China.
Thai characters print method
• 3 Pass
• 1 Pass (default setting)
Column emulation mode
• 48 column mode (default setting)
• 42 column mode
• Paper reduction is not performed for space dot lines of graphics printing data.
• When reducing barcode height, reading of the barcode is not guaranteed. Be sure to check that
the barcode can be read with a user’s barcode reader in advance.

Epson TM-T82X Specifications

General

Print Method	Thermal line printing
Paper Width	80 mm
Autocutter	Yes
Power Supply	AC 100-240V, 50/60 Hz
Paper Roll Diameter	83 mm
Interface	USB, Ethernet
Dimensions	140 x 199 x 146 mm
Resolution	203 dpi x 203 dpi