44
Selecting the number of head energizing parts
•One-part energizing
•Two-part energizing
•Four-part energizing
•Auto energizing (Initial setting)
Selecting single-color printing/two-color printing
•Single-color printing (Initial setting)
•Two-color printing
Selecting black-color density in two-color printing
•Light
•Standard (Initial setting)
• Usually, the number of head energizing parts does not need to be changed.
• When auto energizing is selected, the printer usually prints in one-part energizing, but it
automatically shifts to two-part energizing if print duty is high.
This setting affects black-color density only in two-color printing, but not that in single-color
printing.
To Next Page
Loading...
