EasyManua.ls Logo

Epson TM T88IV

Epson TM T88IV
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5 Replacement of
75
5
Electrical Characteristics
The operating voltage of the TM-T88IV is DC24 ± 7%, the same as the TM-T88III. The current
consumption differs depending on the print duty.
DIP Switches
The functional assignments of DIP switches are the same as those of the TM-T88III. With the
same settings as for the TM-T88III, the same functions are enabled for the TM-T88IV.
Printer Status
The TM-T88IV goes to the same status under the same conditions as the TM-T88III. You can
replace the TM-T88IV with the TM-T88III without modifying applications.
Hexadecimal Dumping
Command operation during hexadecimal dumping
During hexadecimal dumping, most commands do not function.
TM-T88IV: Only DLE EOT functions.
TM-T88III: Only DLE EOT, DLE ENQ, and DLE DC4 function.
Ending hexadecimal dumping
After the hexadecimal dumping, the TM-T88IV performs autocutting (partial cut), but the
TM-T88III does not.
Logo Registration
The TM-T88IV can register logos in the NV memory (NVRAM) with the TM Flash LOGO Setup
Utility for NVRAM (TM-Flogo) as can the TM-T88III.
For detailed information about ESC/POS commands, see the ESC/POS Application
Programing Guide.

Table of Contents

Other manuals for Epson TM T88IV

Related product manuals