EasyManuals Logo

Epson TM T88IV Technical Reference Guide

Epson TM T88IV
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
64
Setting Check Modes
Besides the ordinary print mode, the printer has a self-test mode and hexadecimal dumping
mode to check settings of the printer.
Self-test Mode
You can confirm the following printer functions by running the self-test.
•Control circuit functions
•Printer mechanism
•Print quality
•ROM version
•DIP switch settings
Starting Self-test
Follow the steps below to run the self-test.
1
Close the roll paper cover.
2
While pressing the FEED button, turn on the printer. (Keep pressing the
FEED button until the printer starts printing.)
The printer prints current status of the printer on the roll paper.
When the printer finishes printing the printer status, the following message is printed and
the PAPER OUT LED flashes. (The printer is now in the self-test wait mode.):
“If you want to continue SELF-TEST printing. Please press FEED button.”
3
To begin the print test again, press the FEED button while the printer is in
the self-test wait mode.
4
After printing the following message, the printer is initialized and returned
to the normal mode.
“*** completed ***“
With the LAN interface, before printing starts, it takes 6 seconds if the IP address is fixed
and 13 seconds if the IP address is obtained with the automatic setting. (It may takes longer
depending on the response time from a host.)

Table of Contents

Other manuals for Epson TM T88IV

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson TM T88IV and is the answer not in the manual?

Epson TM T88IV Specifications

General IconGeneral
Dimensions (WxDxH)145 x 195 x 148 mm
Standard interfacesEthernet
Connectivity technologyWired
Ethernet LAN (RJ-45) ports1
TypePOS printer
Character size1.1 x 2.1 mm
Print technologyThermal
Maximum resolution180 x 180 DPI
SafetyUL/CSA, TUV
CertificationCE, EN55022, EN55024, RoHS, WEEE
Built-in barcodesCODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, EAN13, EAN8, ITF-14, PDF417, UPC-A, UPC-E
Country of originChina
Autocutter durability1.5 million cuts
Mean time between failures (MTBF)360000 h
Product colorWhite
Maximum roll diameter83 mm
Supported paper width72 mm
Operating temperature (T-T)5 - 45 °C
Wi-FiNo
Ethernet LANYes
Ethernet LAN data rates10, 100 Mbit/s
Power supply typeDC
Pallet width800 mm
Pallet height1837 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Pallet height (UK)2250 mm
Quantity per pallet128 pc(s)
Quantity per pallet (UK)192 pc(s)
Master (outer) case width400 mm
Quantity per pallet layer16 pc(s)
Master (outer) case height255 mm
Master (outer) case length490 mm
Quantity per pallet layer (UK)24 pc(s)
Quantity per master (outer) case4 pc(s)
Package depth257 mm
Package width193 mm
Package height241 mm
Package weight2780 g
Quantity per pack1 pc(s)

Related product manuals