Chapter 1 Product Overview
13
1
Control Panel
Buttons
FORWARD button
Pressing this button once feeds the slip paper by one line. Holding this button down feeds the
slip paper continuously.
REVERSE button
•Pressing this button once reverses the slip paper by one line. Holding this button down
reverses the slip paper continuously.
•Turning on the power switch while pressing this button starts the self-test. (For details about
the self-test, see "Self-test Mode" on page 42.)
RELEASE button
Pressing this button releases the slip paper.
LED
POWER LED (green)
•Lights when the power supply is on.
•Goes out when the power supply is turned off.
ERROR LED (red)
Lights or flashes when the printer is offline.
•Lights after the power is turned on or after a reset (offline). Automatically goes out after a
while to indicate that the printer is ready.
•Flashes when an error occurs. (For details about the flash codes, see "Error Status" on page 15.)
•Goes out during regular operation (online).
PO WER
FOR WARD