Epson TM-U590 - Inserting Slip Paper

Chapter 1 Handling
47
4
Inserting Slip Paper
1
Turn the printer on.
2
When the SLIP LED flashes, insert the slip paper, using the right edge of
the slip paper inlet as a guide (➀) as far as it will go (➁).
When the slip paper is detected by the sensor, the SLIP LED stops flashing but stays on and
the paper is automatically drawn into the printer and printing begins.
3
After printing is complete, remove the slip paper.
• Use slip paper that meets the printer specification. For details about paper specification,
see "Paper Specifications" on page 19.
• Do not use wrinkled or curled paper.
After the slip paper is detected, the printer moves the slip paper back and forth to detect the
position of its top edge. If the setting position of the slip paper is not correct, the printer
takes a few seconds to detect the position of the top edge.
2
1
P
O
W
E
R
E
R
R
O
R
RELEASE
S
L
I
P
FOR
W
ARD
FO
RW
AR
D
R
E
V
E
R
S
E
R
EV
ER
S
E
R
E
L
E
A
S
E
R
EL
EASE
EPSON