20
• Do not use paper that has holes or is translucent at the BOF position.
• Do not use paper that has holes at the TOF sensor position or that has dark positions
with low reflection (less than 40% reflection) on the back.
31.0
Form stopper position
1.3
18.9
18.0
38.5
Slip feeding
roller position
TOF sensor
position
Center of the
print head
37.2
21.9Slip side guide
BOF sensor
Paper insertion
direction
3.6
[Units: mm (All the numeric values are typical.)]
Paper insertion
direction
15 24
10
Area where paper holes are
prohibited and reflection rate for
the back of paper should be 40%
or more.
Paper holes and translucence
prohibited area.
To Next Page
Loading...
