Epson U220B - TM Two-color Dot-matrix Printer Technical Reference Guide

Rev. D
How to Install the Printer on a Wall with the WH-10
B-9
TM-U220 Technical Reference Guide
B.1.7 Mounting the printer on the wall
CAUTION:
When mounting the printer, make sure that the wall-mount is securely fastened to the
wall.
When the brackets are attached properly for the TM-U220B/U220D, the printer’s
operation panel will be on the top and the connector side on the bottom. If this is not
the case, please see the installing the brackets section and reattach the brackets in the
proper position.
Slide the brackets into the slots of the wall-mount, starting with the top bracket.

Epson U220B - TM Two-color Dot-matrix Printer Specifications

General

Print Method	9-pin, serial impact dot matrix
MTBF	180, 000 hours
Weight	Approx. 2.5 kg
Data Buffer	4 KB or 40 bytes
Paper Handling	Friction feed
Character Set	95 Alphanumeric, 128 x 12 Graphic
Paper Dimensions	58, 70, 76 mm
Interface	USB, Serial (RS-232C), Parallel (IEEE-1284)
Reliability	18 million lines
Dimensions	160 (W) x 248 (D) x 139 (H) mm
Inked Ribbon	ERC-38
Color Support	Two-color printing (Black and Red)
Print Speed	4.7 LPS (lines per second) at 40 columns, 6.0 LPS at 30 columns
Character Size	1.2 × 3.1 mm (W × H) / 1.6 × 3.1 mm (W × H)