Epson U220B - TM Two-color Dot-matrix Printer Technical Reference Guide

1-2 General Information Rev. D
1.2 Product Structure
1.2.1 Printer types
TM-U220 has 3 model types: A, B, D. The features are as following.
1.2.2 Standard Parts Included with the Printer
This printer is packed with the materials listed below.
❏ User’s Manual
❏ Roll paper: 1 roll
❏ Power switch cover (using this cover enables you to prevent accidental turning off of the
power)
❏ Exclusive ribbon cassette ERC-38(B/R)
❏ Power supply unit (May not be included with the printer)
Note:
The “AC Adapter. C” which is packed in the carton box of ANK model is not able to use for the
Multilingual model.
*Multilingual means the printer model that can print any one of the following: Japanese Kanji,
Simplified Chinese, Traditional Chinese, Thai characters, or Korean characters.
Type A Type B Type D
Two color printing Yes Yes Yes
Autocutter Yes Yes No
Take up device Yes No No
paper width (mm) 76 76/ 69.5/ 57.5 76/ 69.5/ 57.5
wall hanging install No Yes Yes
Supported
language
Alphanumeric model:
alphanumeric
Multilingual model
It supports
alphanumeric and
printing with one of the
following:
• Japanese Kanji
• Simplified Chinese
• Traditional Chinese
• Korean
• Thai
Alphanumeric model:
alphanumeric
Multilingual model
It supports
alphanumeric and
printing with one of the
following:
• Japanese Kanji
• Simplified Chinese
• Traditional Chinese
• Korean
• Thai
Alphanumeric model:
alphanumeric
Multilingual model
It supports
alphanumeric and
printing with one of the
following:
• Japanese Kanji
• Simplified Chinese
• Traditional Chinese
• Korean
• Thai
Near end detector Factory option Factory option Factory option

Epson U220B - TM Two-color Dot-matrix Printer Specifications

General

Print Method	9-pin, serial impact dot matrix
MTBF	180, 000 hours
Weight	Approx. 2.5 kg
Data Buffer	4 KB or 40 bytes
Paper Handling	Friction feed
Character Set	95 Alphanumeric, 128 x 12 Graphic
Paper Dimensions	58, 70, 76 mm
Interface	USB, Serial (RS-232C), Parallel (IEEE-1284)
Reliability	18 million lines
Dimensions	160 (W) x 248 (D) x 139 (H) mm
Inked Ribbon	ERC-38
Color Support	Two-color printing (Black and Red)
Print Speed	4.7 LPS (lines per second) at 40 columns, 6.0 LPS at 30 columns
Character Size	1.2 × 3.1 mm (W × H) / 1.6 × 3.1 mm (W × H)