Epson U220B - TM Two-color Dot-matrix Printer Technical Reference Guide

3-38 Setup Rev. D
3.5.2 Advanced Printer Driver (APD)
3.5.2.1 Installing and Setting Up
When you install and set up the APD, please refer to the “EPSON Advanced Printer Driver
Install Manual.“ The Manual is a PDF file, which is provided with other manuals for the APD.
Outline of installation and setup procedure is as follows.
When the printer is
Ethernet model on
Window 98 or 95
1. Install EPSON Advanced Printer Driver
Select the modules needed to install:
TM-U220, Status API (and USB device driver)
When the printer is
USB interface model
3. Install “EPSON
Net Direct print”
2. Install “USB driver”
4. Set up the printer port
5. Test print
When the printer is
Serial or Parallel
interface model
What interface model?

Epson U220B - TM Two-color Dot-matrix Printer Specifications

General

Print Method	9-pin, serial impact dot matrix
MTBF	180, 000 hours
Weight	Approx. 2.5 kg
Data Buffer	4 KB or 40 bytes
Paper Handling	Friction feed
Character Set	95 Alphanumeric, 128 x 12 Graphic
Paper Dimensions	58, 70, 76 mm
Interface	USB, Serial (RS-232C), Parallel (IEEE-1284)
Reliability	18 million lines
Dimensions	160 (W) x 248 (D) x 139 (H) mm
Inked Ribbon	ERC-38
Color Support	Two-color printing (Black and Red)
Print Speed	4.7 LPS (lines per second) at 40 columns, 6.0 LPS at 30 columns
Character Size	1.2 × 3.1 mm (W × H) / 1.6 × 3.1 mm (W × H)