Rev. D Setup 3-11
TM-U220 Technical Reference Guide
8. Close the unit, as shown in the left
illustration.
9. Insert the end of the bottom paper
(journal paper) into the paper take-up
spool, as shown in following.
10. Insert the paper take-up spool in the
printer. Be sure that the paper is aligned
with the spool's flange, as shown.
11. Feed the paper with the FEED button so
that the paper is taken up by the spool.
12. Close the roll paper cover and tear off the
roll paper with the manual cutter, as
shown.
To Next Page
Loading...
