Epson VT Series - Protection Model

VT6L Maintenance 18. Controller Unit
VT series Maintenance Manual Rev.2 149
18.6.2 Protection Model
SD
Card
Removal
Protection
(1)
Turn OFF the Manipulator
.
(2)
Remove the power plug.
(3)
Remove
the connector plate.
Reference: 7.7 Connector Plate
(4)
Push the SD card which is inserted near the option
al slot to eject.
SD
Card
Installation
Protection
(1)
Push the SD card and inset to the SD card slot near the option
al slot.
(
2)
M
ount the connector plate.
Reference: 7.7 Connector Plates